Restoring Default Settings - HIKVISION DS-7600NI-Q1 Series User Manual

14.6 Restoring Default Settings

Step 1 Enter the Default interface.
Menu > Maintenance > Default
Step 2 Select the restoring type from the following three options.
Restore Defaults: Restore all parameters, except the network (including IP address, subnet
mask, gateway, MTU, NIC working mode, default route, server port, etc.) and user account
parameters, to the factory default settings.
Factory Defaults: Restore all parameters to the factory default settings.
Restore to Inactive: Restore the device to the inactive status.
Step 3 Click the OK button to restore the default settings.
The device will reboot automatically after restoring to the default settings.
Network Video Recorder User Manual
Figure 14-9 Restore Defaults
204