Table of Contents
Advertisement
User Manual of DS-9664NI-RH Series NVR
2)
Select the overwrite mode to Yes or No.
3)
Click Apply to save the settings.
Note:
Enabling the Overwrite setting will cause recorded files to be overwritten once the HDD is full.
5.2 Configuring Record/Capture Schedule
Purpose:
Set the record schedule, and then the camera automatically starts/stops recording according to the configured
schedule.
Note:
In this chapter, we take the record schedule procedure as an example, and the same procedure can be
applied to configure schedule for both automatic recording and capture. To schedule the automatic capture,
you need to choose the Capture tab in the Schedule interface.
Steps:
1.
Enter the Record Schedule interface.
Menu>Record >Schedule
2.
Configure Record/Capture Schedule
1)
Select Record/Capture Schedule.
2)
Choose the camera you want to configure.
3)
Select the checkbox after the Enable Schedule item.
4)
Click Edit.
5)
In the message box, you can choose the day to which you want to set schedule.
6)
To schedule an all-day recording, check the checkbox after the All Day item.
Figure 5.7 Record/Capture Schedule
46
Advertisement
Table of Contents
