Table of Contents
Advertisement
User Manual of DS-9664NI-RH Series NVR
14.3 Configuring DST Settings
Steps:
1.
Enter the General Settings interface.
Menu >Configuration>General
2.
Choose DST Settings tab.
You can check the checkbox before the Auto DST Adjustment item.
Or you can manually check the Enable DST checkbox, and then you choose the date of the DST period.
14.4 Configuring More Settings
Steps:
1.
Enter the General Settings interface.
Menu >Configuration>General
2.
Click the More Settings tab to enter the More Settings interface, as shown in Figure 14.4.
3.
Configure the following settings:
•
Device Name: Edit the name of NVR.
•
Device No.: Edit the serial number of NVR. The Device No. can be set in the range of 1~255,
and the default No. is 255.
•
Operation Timeout: Set timeout time for menu inactivity.
Example: when the timeout time is set to 5 Minutes, then the system will exit from the current
operation menu to live view screen after 5 minutes of menu inactivity.
•
Two-way Audio Input: Select the two-way audio input interface to MIC In or Line In.
4.
Click the Apply button to save the settings.
Figure 14.3 DST Settings Interface
Figure 14.4 More Settings Interface
192
Advertisement
Table of Contents
