Table of Contents
Advertisement
User Manual of DS-9664NI-RH Series NVR
10.3 Repairing Virtual Disk
When the virtual disk is in Degraded or Functional status, yet it cannot be viewed on the HDD information
list, you need to perform the repairing operation.
Steps:
1.
Enter the Array interface.
Menu >HDD>RAID>Array
2.
Click the Virtual Disk tab to enter the Virtual Disk interface.
3.
Select the virtual disk from the list to be repaired.
4.
Click
to start repairing the selected virtual disk. After successfully repairing, the following
message box will pop up. Click
Figure 10.23 Repairing Virtual Disk Successfully
The disk shows again in the HDD Information interface (Menu>HDD>General).
Figure 10.22 Virtual Disk Interface
OK
to finish the settings.
Figure 10.24 HDD Information Interface
151
Advertisement
Table of Contents
