Step 2 Check the checkbox of the Enable Virtual Host.
Step 3 Click the Save button to save the setting.
Step 4 Enter the IP camera management interface of NVR. The Connect column appears on the
right-most side of the camera list, as shown in the Figure 11-25.
Configuration > Remote Configuration > Camera Management > IP Camera
Step 5 Click the link and the page of IP camera management appears.
11.4 Checking Network Traffic
Purpose:
You can check the network traffic to obtain real-time information of NVR such as linking status,
MTU, sending/receiving rate, etc.
Step 1 Enter the Network Traffic interface.
Menu > Maintenance > Net Detect
Network Video Recorder User Manual
Figure 11-24 Advanced Settings Interface
Figure 11-25 Connect to IP Camera
164