Checking Network Traffic - HIKVISION HWN-2100H Series User Manual

Leave the Enable UPnP checkbox unchecked.
Click to activate the External Port Settings dialog box. Configure the external
port No. for server port, http port, RTSP port and https port respectively.
The value of the RTSP port No. should be 554 or between 1024 and 65535, while the
value of the other ports should be between 1 and 65535 and the value must be
different from each other. If multiple devices are configured for the UPnP™ settings
under the same router, the value of the port No. for each device should be unique.
Click OK to save the setting for the current port and return to the upper-level
menu.
Click Apply to save the settings.
Enter the virtual server setting page of router; fill in the blank of Internal Source
Port with the internal port value, the blank of External Source Port with the
external port value, and other required contents.
Each item should be corresponding with the device port, including server port, http
port, RTSP port and https port.
The above virtual server setting interface is for reference only, it may be different due
to different router manufactures. Please contact the manufacture of router if you
have any problems with setting virtual server.

Checking Network Traffic

Purpose:
Network Video Recorder User Manual
External Port Settings Dialog Box
Setting Virtual Server Item
118