Configuring Virtual Host; Checking Network Traffic - HIKVISION DS-7600NI-Q1 Series User Manual

The above virtual server setting interface is for reference only, it may be different due to different
router manufactures. Please contact the manufacture of router if you have any problems with
setting virtual server.

11.2.10 Configuring Virtual Host

Purpose:
You can directly get access to the IP camera management interface after enabling this function.
The Virtual host function can be only configured through the web browser.
Step 1 Enter the Advanced settings interface, as shown in the Figure 11-27.
Configuration > Network > Advanced Settings > Other
Step 2 Check the checkbox of the Enable Virtual Host.
Step 3 Click the Save button to save the setting.
Step 4 Enter the IP camera management interface of NVR. The Connect column appears on the
right-most side of the camera list.

11.3 Checking Network Traffic

Purpose:
You can check the network traffic to obtain real-time information of NVR such as linking status,
MTU, sending/receiving rate, etc.
Step 1 Enter the Network Traffic interface.
Network Video Recorder User Manual
Figure 11-27 Advanced Settings Interface
171