Checking Network Traffic; Configuring Network Detection; Testing Network Delay And Packet Loss - HIKVISION EKI-K82T46 User Manual

3. Enter the NVR's IP camera management interface. The Connect column appears on the right-most side
of the camera list.
11.3

Checking Network Traffic

Purpose
You can check the network traffic to obtain real-time information of the NVR such as linking status, MTU,
sending/receiving rate, etc.
1. Enter the Network Traffic interface, Menu > Maintenance > Net Detect.
2. You can view the sending rate and receiving rate information on the interface. The traffic data is
refreshed every second.
11.4

Configuring Network Detection

Purpose
You can obtain network connecting status of NVR through the network detection function, including
network delay, packet loss, etc.
11.4.1

Testing Network Delay and Packet Loss

1. Enter the Network Traffic interface, Menu > Maintenance > Net Detect.
2. Click the Network Detection tab to enter the Network Detection menu.
3. Enter the destination address in the Destination Address text field.
4. Click the Test button to start testing network delay and packet loss. The testing result pops up on the
NVR User Manual 061220NA
Figure 193, Network Traffic Interface
Figure 194, Network Detection Interface
132