Configuring Virtual Host; Checking Network Traffic - HIKVISION DS-76O4NI-K1 B User Manual

11.2.10 Configuring Virtual Host

Purpose:
You can directly get access to the IP camera management interface after enabling this function.
The Virtual host function can be only configured through the web browser.
Step 1 Enter the Advanced settings interface, as shown in the Figure 11-27.
Configuration > Network > Advanced Settings > Other
Step 2 Check the checkbox of the Enable Virtual Host.
Step 3 Click the Save button to save the setting.
Step 4 Enter the IP camera management interface of NVR. The Connect column appears on the
right-most side of the camera list.

11.3 Checking Network Traffic

Purpose:
You can check the network traffic to obtain real-time information of NVR such as linking status,
MTU, sending/receiving rate, etc.
Step 1 Enter the Network Traffic interface.
Menu > Maintenance > Net Detect
Network Video Recorder User Manual
Figure 11-27 Advanced Settings Interface
167