Talkswitch 48-CA User Manual page 91

Internal clock setting:
TalkSwitch can obtain time information from Caller ID for its internal clock. If you
have indicated that you do have Caller ID on any of the lines, this option defaults to
the active position. If it is de-activated, TalkSwitch can obtain its time information
from the time and date set in the 'Mode' tab under Automatic Mode Switching.
TalkSwitch's clock information is used for Automatic Mode Scheduling and for
internal Caller ID information when intercom calls are placed in the office.
Internal Caller ID options:
TalkSwitch has the ability to generate name and number Caller ID to each extension
during intercom calls. If your Caller ID unit/telephone does not support the name
option, you can choose to have TalkSwitch send the number only.
Audio Output Options:
TalkSwitch can output different audio to the PA jack. The default setting is to play
only PA announcements through the PA jack by dialing
Other options include Voicemail Screening which can be useful in a home
environment, Demo with a router which is used for demonstrating the product, and
Static VoIP Demo which is used strictly for demonstrating 2 TalkSwitch CVA units
connected to a hub or switch and acting as 2 separate locations.
Auto Attendant Transfer Prompts
TalkSwitch can disable playing of transfer prompts to callers when redirecting calls
from the Auto Attendant.
C o n f i g u r i n g T a l k S w i t c h
0 from any extension.
*
8 5