Talkswitch 48-CA User Manual page 82

2. Next, enter the appropriate command as listed below. After each command,
press # to confirm the entry.
Auto Call Back
1
2
3
4
There are 4 Auto Call Back accounts per TalkSwitch unit. If you need to record an
Announced Message for a particular Auto Call Back account, it must be on the same
TalkSwitch unit as the account.
If you need to configure and/or record an Announced Message from a remote location
and do not have the Auto Attendant set to answer this Call Back line, you can call your
Call Back number and let it ring 15 times. A generic Auto Attendant will answer and you
can configure Call Back by pressing 6.
Allow Call Bridge:
To allow Call Bridge after a Call Back has been accepted, check the Allow Call Bridge
box. You may also restrict the Call Bridge line access by choosing the Hunt Group
Access button. By default, Call Bridge is enabled when Call Back is activated. You
will not be prompted for another password when you choose a Hunt Group at the
Auto Attendant.
When entering a Call Back phone number using a telephone, you can enter special
characters using a special prefix. The default prefix is the
dialing string you will need to dial
# , dial # . When you have completed the entire dial string, dial
*
7 6
Recording
61
62
63
64
* * , for a 2 second pause dial
T a l k S w i t c h U s e r G u i d e
Playback
71
72
73
74
key. To enter a
* *
* 0, and for a
# .
in a