Telephone Lines - Talkswitch 48-CA User Manual

3.3.3.3

Telephone Lines

This section deals with how TalkSwitch will handle incoming calls based on the
incoming line and ring cadence (distinctive ring numbers).
First, select a line to configure. Then select the appropriate mode for which you want
TalkSwitch to use these settings. If you entered the phone number in the Telephone
Lines section under System Information, the number will appear on the corresponding
button.
Play Auto Attendant/Go to Voice Mailbox:
If you wish to have the Auto Attendant answer calls to give callers options, select
the appropriate Auto Attendant and number of rings before the Auto Attendant
answers. If you do not want to use an Auto Attendant and simply want the call to go
to a voice mailbox, then select the appropriate mailbox. The caller will always hear
one more ring than the number of rings you select, since TalkSwitch uses the first
ring to determine the ring type and support Caller ID information.
Ring Extensions only (no Auto Attendant is played):
If you don't want the Auto Attendant to answer calls on this line, select this option.
by default, all the Local Extensions are set to ring immediately during an inbound
call. If you select this option, no Call Cascade actions (such as voicemail) can be
performed.
6 4 T a l k S w i t c h U s e r G u i d e