Talkswitch 48-CA User Manual page 67

The digits 6, 7, 8 and 9 are not available as programmable options, since they are used
for other system features:
If 6 is dialed:
If you press '6' at the Auto Attendant, you will be able to configure and use Auto
and Prompted Call Back. See section 2.3.4 for more details about configuring Call
Back and section 3.7.2 for details on using Call Back.
If 7 is dialed:
TalkSwitch uses 7 to precede PBX Extensions of another Centrex or PBX system. If
TalkSwitch is not connected to another system, 7 is inactive. If TalkSwitch is
connected to another PBX system, see section 2.3.5.4 for more details.
If 80 – 88, or 9 is dialed:
If you press '80 – 88 or 9' at the Auto Attendant, you will access Call Bridge if it has
been permitted. See section 2.3.4.3 for more details on configuring Call Bridge and
section 3.7.1 for details on how to use Call Bridge.
Utilities for Auto Attendants:
Record Instructions:
Selecting this button displays a dialog box showing the instructions on how to
record and playback an Auto Attendant using a telephone. No adjustments are
required for the recording volume, as TalkSwitch automatically adjusts the recording
volume for optimal recordings. If you find that the playback of your Auto Attendant
messages are too low, you can adjust the playback volume on the Audio Controls
page located under 'Options' .
C o n f i g u r i n g T a l k S w i t c h 6 1