Auto Call Back - Talkswitch 48-CA User Manual

that a small initial long distance charge will be incurred at your current
location when activating Prompted Call Back.
By default, Prompted Call Back is not activated in the TalkSwitch configuration. You will
need to activate Prompted Call Back before you can use this feature.
The Call Back out of the system to the number programmed always uses the same line
that was dialed.
3.3.4.1

Auto Call Back

There are 4 Auto Call Back numbers that can be configured. Choose an Auto Call Back
to configure and then activate it.
Number to call back:
Enter the Call Back number. This phone number should be entered exactly as you
would normally have to dial the number from this line (i.e. do not enter a line Hunt
Group in the dialing string).
Use dialing prefix:
If you usually have to dial the same prefix when using Auto Call Back (for example a
long distance calling card number), you may want to enable 'Use dialing prefix' .
7 4 T a l k S w i t c h U s e r G u i d e