Talkswitch 48-CA User Manual page 84

*70,1010555,, This corresponds to
2 second pause to wait for the new dialtone, then 1010555 for the long distance
prefix, and a 4 second pause to wait for the new dialtone before dialing the actual
long distance phone number.
This saves you the hassle of having to enter the same prefix every time you want to
set up a Prompted Call Back phone number.
When entering a Call Back phone number using a telephone, you can enter special
characters using a special prefix. The default prefix is the
dialing string you will need to dial
# , dial * # . When you have completed the entire dial string, dial
Use password on Call Back:
This option is designed to give you security and to restrict who can use Prompted
Call Back. Simply fill in a 4- to 8-digit password, and when TalkSwitch calls you
back, you will be prompted to input the password to accept Call Back.
Use Announced message:
As was described in the Auto Call Back section, this option is recommended if the
number TalkSwitch will be calling back is to a hotel or a location where somebody
else will be answering the call. The Announced message option allows you to record
a message that plays when the call is initially answered during a Call Back. For
example, you may want to say "Please transfer this call to Bob in room 307".
The Announced Message can be recorded locally using an extension handset or
remotely by accessing Call Back from the Auto Attendant. The Record message
button gives the instructions as follows:
Pick up a telephone handset connected to the TalkSwitch and use the following
keypad commands to record the Prompted Call Back Announced Message:
1. Press # to enter command mode. If required, enter the password.
2. Next, enter the appropriate command as listed below. After each command,
press # to confirm the entry.
To record message: 65
To playback message: 75
7 8
* 70 for disabling the Call Waiting feature, a
* * , for a 2 second pause dial
T a l k S w i t c h U s e r G u i d e
key. To enter a
* *
* 0, and for a
# .
in a