Ip Configuration - Talkswitch 48-CA User Manual

If the administrator forgets the password, the only option to gain access to the
configuration settings is to contact TalkSwitch Technical Support.
3.3.1.2

IP Configuration

In order for the TalkSwitch 48-CVA to function properly, an IP address and other
pertinent information is required. If you have a TalkSwitch 48-CA, then this
information is only required if you want to configure the system remotely or network
it with a CVA on the LAN.
In the "System IP Settings" section:
If you have a DHCP server and your TalkSwitch unit(s) are connected to the LAN, then
all fields should already be filled with the correct information. If there is no DHCP
server present, the following fields need to be filled in if you plan on using the VoIP
capabilities of the TalkSwitch 48-CVA.
Box X IP Address:
Assign an available static IP address to each TalkSwitch unit. If you use a DHCP
server, you need to reserve an IP address for each TalkSwitch unit. To reserve an IP
address, you will need the MAC address of each unit. See the beginning of section
3.3 for details on checking the MAC address.
2 8 T a l k S w i t c h U s e r G u i d e