Back Panel Descriptions - Talkswitch 48-Ca/Cva - Talkswitch 48-CA User Manual

LED light: State
Line 4 On Solid
Pulsing Slowly
Flickering
Quick Pulse
For more details on line LED error codes, see Troubleshooting — Appendix A.
2.3 Back Panel Descriptions — TalkSwitch 48-CA/CVA
Before connecting all your phones and lines to TalkSwitch, you may want to proceed
with configuring the unit first. (See section 3.1) This will minimize the disruption
time for your telephone lines while setting up the system.
Jacks/Ports What to plug in
MUSIC Plug in a radio, CD player, PC soundcard or any other device that
emits an audio signal if you wish to use the TalkSwitch Music-on-
Hold feature. This is a 1/8" (3.5 mm) phono jack. Mono cables are
recommended. If you have multiple TalkSwitch units on a LAN,
you will need to provide a music source to each TalkSwitch.
PA Connect to a P.A. system if you wish to use the external paging
feature. This is a 1/8" (3.5 mm) phono jack. Mono cables are rec-
ommended. If you have multiple TalkSwitch units on a LAN, you
will need to provide a connection from each TalkSwitch to the PA
Amplifier.
I n s t a l l i n g T a l k S w i t c h
Description
Line 4 is currently in use.
Line 4 caller is on hold.
Line 4 is ringing.
Line 4 is engaged by a device that is shar-
ing the line with TalkSwitch.
9