Voip Lines - Talkswitch 48-CA User Manual

Note: if you call on any line, TalkSwitch will answer after 15 rings with a generic Auto
Attendant so that you can still access the system to make configuration changes, change
modes, access voicemail or dial Extensions.
Extensions to ring on an incoming call (before Auto Attendant answers):
Select the Local Extensions you would like to ring before the Auto Attendant
answers. by default, all activated Local Extensions will ring. If you require certain
Extensions to ring in a sequence, i.e. one extension rings first, then another on the
2nd ring, click the "Adjust Sequence" button to configure.
Remember: Callers will only be directed according to settings for an Auto Attendant first.
Calls will not follow the Call Cascade settings of any of the Local Extensions programmed
to ring before the Auto Attendant answers.
Adjust Sequence:
This section controls how the Extensions will ring before the Auto Attendant
answers the call.
•
If you have chosen the Auto Attendant to answer calls immediately, this section
does not require configuration and will be grayed out.
•
If the Auto Attendant is set to answer after 1 or more rings, you can then configure
when specific Extensions will ring before the Auto Attendant answers.
•
If no Auto Attendant is chosen to answer on the specified line, then you can specify
when particular Extensions will ring up to 9 rings. Remember that no calls will go to
voicemail unless you first have an Auto Attendant answer.
3.3.3.4

VoIP Lines

This section deals with how TalkSwitch 48-CVA will handle incoming VoIP calls.
First, select a VoIP line to configure. Then select the appropriate mode for which you
want TalkSwitch to use these settings. If you entered the phone number in the VoIP
C o n f i g u r i n g T a l k S w i t c h 6 5