Talkswitch 48-CA User Manual page 53

Message Waiting Light:
Click on this option to set a message waiting light to indicate when a message has
been received for an extension. You can select on which local extensions in your
system the light will be activated when a message is received. By default, the
message waiting light will turn on at the extension associated with a local
mailbox.
Configuration Notification Options:
Define how TalkSwitch will dial out of your office when notifying you of a voicemail.
If the first connection is not successful, define how many times, and at what
intervals TalkSwitch will continue to attempt to reconnect.
Under the conditions where you choose to be notified by both pager and remote
phone, TalkSwitch makes sure that both locations have been contacted before
finishing the notification process.
Dial notification phone number:
These parameters control which Hunt Group is used for both the Remote Phone and
Pager Notification calls. It also allows you to adjust the number of rings before it will
abort the attempt then follow the parameters listed in the next section.
If attempt unsuccessful:
These parameters control how many times TalkSwitch will try to notify the Remote
Phone or Pager before it will abort the entire notification attempt. You can also
specify the time interval between attempts.
C o n f i g u r i n g T a l k S w i t c h 4 7