On-Hold Settings:
If you have a music source connected to the MUSIC jack, then you can select the
'play music' option. Otherwise leave the option set to play a 'double beep' when
callers are placed on hold.
Transfer Settings:
Select whether you would like callers to hear ringing or, if you have a music source
connected, music while they are being transferred.
Note: If you connect a music source to the Music jack and do not enable Music-on-hold,
the caller will hear both music and a beep sound when on hold. Also when the caller
makes a selection at the Auto Attendant to go to an extension that has call screening
enabled, they will hear both ringing and music.
If you have more than one unit connected to the LAN, you will need to provide a music
source to all units with lines connected. A 1/8" audio splitter can usually be obtained at
most electronics stores.
4 4
T a l k S w i t c h U s e r G u i d e