Talkswitch 48-CA User Manual page 52

If a caller presses '0':
Select what action to take when a caller presses '0' during the different modes while in a
voice mailbox:
go to voice mailbox:
go to local extension:
go to remote extension:
go to ring groups:
play announcements:
go to auto attendant:
perform no action:
Load Greeting:
You can load a pre-recorded voicemail greeting from your PC to TalkSwitch. The file
must be an 8khz, 8-bit, mono µ-law .wav file.
Voicemail Notification Settings:
Set the manner in which you want to be notified when new messages arrive.
Remote Phone Notification:
If you want to be notified at another location when new messages arrive, you can
use Remote Phone Notification. Simply enter the phone number of the cell phone,
pager or location where you want to be notified.
Notification Settings:
Select Notification Settings to specify how you want TalkSwitch to handle
notification calls.
Pager Notification:
Use Pager Notification if you want to be notified by pager when new messages
arrive. Simply activate the feature then enter the pager phone number and the
numeric message to be displayed on the pager.
4 6
Callers will be transferred to the specified mailbox.
Callers will be transferred to the specified local
extension.
Callers will be transferred to the specified remote
extension.
Callers will be transferred to the specified ring
group.
Callers will be transferred to the specified
announcement.
Callers will be transferred to the Auto Attendant.
No action will be performed when '0' is pressed.
T a l k S w i t c h U s e r G u i d e