Line Hunt Groups - Talkswitch 48-CA User Manual

3.3.1.6

Line Hunt Groups

There are a total of 9 Line Hunt Groups for controlling outbound call line selections.
These Line Hunt Groups are used by the Local and Remote Extensions, and when using
the Call Bridge feature. Each Hunt Group can support several line choices and will
attempt to grab an available line in the order that they are listed (Lines to hunt) for
that Hunt group. These settings have no effect on incoming calls.
Default setup:
Hunt Group 9:
Hunt Group 81:
Hunt Group 82:
Hunt Group 83:
Hunt Group 84:
First select a Line Hunt Group then enter a useful name for identifying this hunt group
elsewhere in the configuration software.
Under Set Line Hunt Group, select the Line Type. If you wish to use this hunt group for
accessing telephone lines, then select 'Phone Lines'. If you wish to use this hunt group
for accessing VoIP lines, then select 'VoIP Lines'.
3 6
selects any available telephone line
selects telephone Line 1
selects telephone Line 2
selects telephone Line 3
selects telephone Line 4
T a l k S w i t c h U s e r G u i d e