Running The Talkswitch Software - Talkswitch 48-CA User Manual

3.2 Running the TalkSwitch software

After installation is complete, double-click the TalkSwitch icon. If TalkSwitch is
currently connected to the same network as your PC, then the configuration software
should automatically detect and retrieve the settings from TalkSwitch (See section
3.3). If TalkSwitch is not yet connected, or connected via the Serial or USB port, then
the following screen will appear with different configuration options.
Connect via Ethernet:
If TalkSwitch is connected on the same LAN as the PC being used to configure the
system, then use this option. Ensure your network cable is properly connected and
the top green LED is on at the back of the TalkSwitch.
Connect via USB:
If TalkSwitch is connected to the PC via a USB cable, then select this option and
press 'Connect' to continue.
Connect via Serial Port:
If TalkSwitch is connected to the PC via a Serial cable, then select this option and
choose the Serial Port associated to the connection. Press 'Connect' to continue.
Connect via Internet:
If TalkSwitch has access to the Internet and port 9393 is mapped from the router/
firewall to TalkSwitch, then you can select this option for remote management of
TalkSwitch.
Work Offline — Open File:
If you wish to work offline on a configuration file, select this option then press the
Browse button to select the file you wish to view/edit.
2 2 T a l k S w i t c h U s e r G u i d e