Conference Calling With Talkswitch - Talkswitch 48-CA User Manual

notification, the Caller ID information will be displayed on the phone. The caller
will not hear the beep as the phone mutes the other side.
1. If the phone does not support Call Waiting Caller ID, then you will hear a beep.
When the Call Waiting notification beep is heard, the person at the extension
can dial 'flash' 7 to put the current caller on hold, then grab the new caller. They
also have the option to terminate the current call and connect to the new caller
by dialing 'flash' 5. If the person at the extension does not want to take the new
call, they can simply ignore the Call Waiting beeps and then TalkSwitch will
direct the caller to the next level of the Call Cascade for that extension (for
example send the caller to the associated voice mailbox).
4.2.8

Conference calling with TalkSwitch

2 TalkSwitch Local Extensions and 1 outside caller:
You do not require access to the telephone company's 3-Way Calling/Conference
service to use TalkSwitch's conference calling capabilities.
1. Establish a call with an outside party.
2. Place the outside caller on hold by pressing 'flash' . Dial the number of the Local
Extension you wish to conference with.
3. When the extension is picked up, you can establish the 3-way call at anytime by
pressing 'flash' then '6' .
2 outside callers and 1 Local Extension (eg: Line 1 and Line 2):
You can do this type of conference call using two different methods.
The first method is similar to above, using only TalkSwitch for the conference
function.
1. Establish a call with an outside party.
2. Place the outside caller on hold and dial the number of the other outside party
you wish to conference with. If you have 'Direct Line Access' enabled at your
extension, you will first need to dial '9' or another Hunt Group before dialing the
second phone number.
3. When the call is answered, you can establish the 3-way call at anytime by
pressing 'flash' '6' .
When using the telephone company's 3-Way Calling/Conference service you can
conference by following the instructions below:
1. Establish a call with an outside party.
2. Place the outside caller on hold by pressing 'flash' 80 and then dial the number of
the other outside party you wish to conference with.
U s i n g T a l k S w i t c h 9 7