Out Of The Office - Making Calls With Call Back And Call Bridge; Using Call Bridge - Talkswitch 48-CA User Manual

Automatic Mode Switching using the Time Scheduler:
Use the configuration software to activate TalkSwitch's Time Scheduler feature. You
can configure TalkSwitch to automatically switch between Modes by configuring the
times for Mode changes in the 'Modes' tab located under Call Handling in the
configuration software.
If at any time you switch modes manually, TalkSwitch will automatically switch to
the proper mode during the next scheduled mode change.
4.7 Out of the Office — Making Calls with Call Back
and Call Bridge
Working together, Call Back and Call Bridge act as your personal long distance
operator. Whether you are across town or around the world, these two features allow
you to place calls from your office telephone line(s).
4.7.1

Using Call Bridge

Call Bridge allows you to place calls using your office telephone lines when you are not
in the office. You can make a call to TalkSwitch, access a telephone line connected to
TalkSwitch and enter the number you want to dial. This is especially useful when you
are out of the office with your cell phone and need to dial a long-distance number. To
avoid long-distance cell rates, all you need to do is make the local call to TalkSwitch to
access Call Bridge, then make the long-distance call — accessing your office savings
plan.
How to use Call Bridge:
Dial into one of TalkSwitch's Lines. When the Auto Attendant answers, select a Hunt
Group (81 – 88 or 9) or Same Line Connect (80). You will then be asked to supply
your Account password to receive dial tone. If you are using Same Line Connect
(80), and the line you are on supports the 3-Way Calling/Conference service, you
will be prompted to enter the phone number.
When you have completed your call (or if the telephone number dialed was busy),
you can do one of the following:
a) Make another call: Press
in progress and you can dial another number or redial the same number.
b) Activate the Auto Attendant: Press
Bridge session and activate the Auto Attendant. Once the Auto Attendant
message begins playing, you have the following options:
1 0 8
# # . TalkSwitch will disconnect you from the call
# * . TalkSwitch will end the Call
T a l k S w i t c h U s e r G u i d e