Info Module/Int Siren; Updates / Disabled - Abus Secvest 2WAY Installation Instructions Manual

If the external siren should be activated when the relevant partition triggers a local or
external alarm, then the partition must be set to Yes.

15.2 Info Module/Int Siren

In the installer menu:
.
Select Info Module/Int Siren
Select the Teach Info Module menu item.
Set the info module / internal siren to learning mode. See the product instructions for
more details. After switching the info module or internal siren to learning mode,
activate the transmission of wireless information from the centre by pressing SEND.
If the receiver beeps twice, the learn message was correctly received. End the learning
procedure by pressing Yes. Cancel the process by pressing No.
The learn procedure is now started again.
No further settings have to be made on the info module or internal siren. Even in the
event of power outage, the info module or internal siren retains the wireless
information of the alarm centre.

15.2.1 Updates / Disabled

This menu item is used to remove the info module or internal siren effectively from the
wireless centre (for example, when the info module is no longer needed). The wireless
centre can also be prevented from updating the info module display. Deactivation frees
up some of the processing capacities on the wireless centre and accelerates reactions
to other components. The "Info Module/Int Siren" module provides the Updates option
for this purpose.
Select the Updates menu item.
When Enabled is selected, the wireless centre continues data transmission to the info
module / internal siren.
When Disabled is selected, the wireless centre stops data transmission to all info
modules. The default menu setting for this option is Disabled.
The wireless centre changes the setting to Enabled when the identity of the wireless
centre is imported into an info module.
58