Contact Id Reports; Force Test Call Now; Dynamic Test Call - Abus Secvest 2WAY Installation Instructions Manual

20.12 Contact ID Reports

Select whether the restoration of a function (closing of an alarm zone, error clearance)
should be transmitted to the command centre. If only the basic function is enabled,
only faults or alarms are transmitted to the command centre but not the reset of this
function.
All transmitted messages are listed in the table. If "Basic + Restore" is selected, then
all messages plus their reset command are transmitted.
Trigger CID Basic code with zone
no. and user
Medical control panel 100
Fire 110
Fire control panel 110
Fire control panel OK -
Fire OK -
Panic 120
Panic control panel 120
Panic control panel OK -
Panic OK -
Burglary 130
Burglary OK -
Cover tamper contact 137
Cover tamper contact OK -
Tamper ext. siren 137
Tamper ext. siren OK 137
Tamper sensor 137
Tamper sensor OK 137
Tamper system 137
Tamper system OK 137
Key box open 150
Key box closed 150
Technical alarm
Technical alarm OK
Power failure
Power failure OK
Reset
Battery fault
Battery fault OK
Battery missing
Battery missing OK
ISDN/GSM fault
ISDN/GSM fault OK
PSTN fault
PSTN fault OK
Jamming
Supervision fault
Supervision fault OK
RF battery fault
Set
Internal active
Unset
Key switch set
Key switch unset
Download successful
Tamper user code
Omit zone
CID Basic + Restore
Man. trigger test report
code with zone no. and
Period. test report
user
Time / day changed
Prog. mode start
100
Prog. mode end
110
User code changed
110
User code deleted
110
Default password setting
110
loaded
120
End time limit
120
When the "CONTACT ID Basic" report type is selected, the codes are transferred
120
according to the table including the zone numbers and users.
120
130

20.13 Force Test Call Now

130
137
Use this option to start a test call immediately on the wireless alarm centre.
137
Select the Force Test Call Now menu item.
137
137
When Force Test Call Now is confirmed with Select, the wireless alarm centre opens
137
communications with the emergency command centre immediately.
137
137
137

20.14 Dynamic Test Call

150
150
Select whether the wireless alarm centre should make a test call every 24 hours.
81
- 150
150 150
301 301
- 301
305 305
311 311
- 311
311 311
- 311
351 351
- -
351 351
- -
380 380
381 381
- -
384 384
401 401
401 401
401 401
409 409
409 409
412 412
461 461
573 573
601 601
602 602
625 625
627 627
628 628
- -
- -
- -
- -