Info Module/Indoor Siren - Abus SECVEST Installer Manual

Configuration

Info module/indoor siren

Name/function
Updates
Ready-to-Set LED
Add Panel (alarm panel only)
1. After selecting this menu item, the following display
appears:
•
Select Add/Del Siren.
2. Select the corresponding siren.
3. After selecting this menu item, the following display
appears:
•
Is the receiver is teach-in mode?
4. Switch the indoor siren or info module to teach-in
mode. Follow the instructions provided in the guide
for the product.
54
Explanation
Activated
Status updates on the info module activated
or zones is displayed "just in time".
Deactivated
No update on the info module and indoor siren
trigger any alarm accordingly.
Activated
Ready-to-Set LED activated on the info module.
Deactivated
Ready-to-Set LED deactivated on the info module.
–
a status change on the alarm system
–
the indoor siren also does not
5. Activate the sending of wireless information from
the alarm panel by pressing Yes.
6. The following display appears:
Did the receiver beep twice?
7. Confirm with Yes.
8. The teach-in message and therefore the IP of
the alarm panel have been correctly received
and successfully stored in the indoor siren or
info module.
9. To repeat or cancel, press No.