Adding The Zone 01 Detector Manually - Abus Secvest 2WAY Installation Instructions Manual

Select the Delete All menu item.
.
Confirm deletion by pressing Yes

13.5 Adding the zone 01 detector manually

In the installer menu:
menu item.
Select the Add/Del Detectors
.
Select Zone 01
Please ensure that no other active detectors are in the tamper state.
You will now be prompted to activate the Tamper contact
Example: Motion sensor
The detector was successfully trained.
To ensure satisfactory communication, the signal strength should be
more than 3.
46
.
Tamper contact
(wall break contact)
Display of
the signal
strength