Rings To Answer; Answer On 1 Ring; Access Mode; Phone Book - Abus Secvest 2WAY Installation Instructions Manual

19.3 Rings to Answer

Select when the wireless alarm centre should accept a call. To select a number of
rings, press Select.
If the value is set to 255, the alarm centre never answers the call.

19.4 Answer on 1 ring

"Secure Callback" must be deactivated (default) until the first
accompanying upload is made. This first upload can be made in the user
menu or installation menu. The downloader operator can use "Secure
Callback", even when the alarm system is programmed to accept calls
automatically.
Select when the wireless alarm centre should accept a call. To select Answer on 1
ring, press Select under the display.
If this function is enabled, the call to remote maintenance is made in steps. The
software calls the wireless alarm centre, waits for two rings and then hangs up.
This activates the alarm system to accept the call. If the next call arrives within
10 to 90 seconds, the alarm centre accepts the call immediately. This skips the
"Rings to Answer" function.

19.5 Access Mode

Select which functions are used for the remote maintenance access mode over remote
data transmission (see table).
Function Meaning
Call out only The wireless alarm centre cannot be called from outside
for remote maintenance. A call to the remote
maintenance PC must be made manually over the user
menu.
Secure Callback With this setting, the remote maintenance call is started
from the alarm centre by the remote maintenance PC.
The alarm centre is called by the remote maintenance
PC. A call is connected where the alarm centre checks
the remote maintenance authorisation. If the parameters
are OK, the alarm centre hangs up and calls the phone
number in the phone book. Remote maintenance can
now be carried out.
Answer on 1 ring The alarm centre accepts the call after the defined
number of rings or according to the selected dial-in
function.

19.6 Phone Book

Select which number should be changed.
Enter the callback number of the installer. These phone numbers can be dialled
in the user menu to start a remote maintenance call manually.
75