Other Devices - Abus Secvest 2WAY Installation Instructions Manual

successful activation of the wireless alarm centre.
Siren P1 - P4 This output is activated on local alarms in the selected partition
for the defined siren duration.
Strobe Set P1 - P4 This output is activated for a local alarm in the selected
partition and remains active until the wireless alarm centre is
deactivated. The output is also activated for 10 seconds after
successful activation of the partition.
Technical This output is activated if a technical zone triggers an alarm.
Medical This output is activated if a medical emergency call is
activated.
Panic This output is activated if a panic alarm is activated.
Fire This output is activated if a fire alarm is activated.
Zone Follow This output follows the state of a zone. An overview of zones
is displayed when this type is selected. Select a corresponding
zone.
User Defined This zone can be remote-controlled by various components
such as remote control units or the code keypad. The output
can also be assigned times at which it is to be activated and
deactivated. If this output type is selected, the times at which
the output is to be activated or deactivated can be entered at
the end (see the note below).
FullSet RDY P1 - This output is activated when the partition is ready to be
P4 activated.
Part Set P1 - P4 This output is activated if a partition is internally activated.
Full Set P1 - P4 This output is activated if the partition is activated.

15. Other Devices

The following components can be added under this menu item:
External siren
Info module
WAM
Arming station
56
Internal siren