Abus Secvest 2WAY Installation Instructions Manual page 104

•
Testing
Installer Menu
Select the corresponding Secvest Key 2WAY wireless cylinder (Door Lock 1, Door Lock 2, Door
Lock 3 or Door Lock 4). The wireless cylinder functions and correct positioning of DIP switch 3 to
the door hinge in the Secvest Key 2WAY can be tested here.
"Unlocked" is shown on the Secvest 2WAY display when the door is unlocked. "Locked" is shown
when the button on the Secvest Key 2WAY wireless cylinder is pressed and the door is then
locked. The received signal strength is also shown.
3.2. Switching 2WAY Replies on / off
System Options
Installer Menu
•
"Y" (yes) is the default factory setting.
•
When "N" (no) is selected, no feedback is sent to the FU8100 wireless remote control, FU8110 wireless
control unit and FU59xx Secvest Key 2WAY wireless cylinder.
Testing Secvest Key
User Access 2 Way Replies
IV
A1 -
Y/N