Abus Secvest 2WAY Installation Instructions Manual page 105

3.3. Tamper alarm
Installer Menu System Options
•
Factory setting: Disabled
•
When "Enabled" is selected, tamper alarms are transmitted over the selected communication method, even
when the alarm centre is deactivated. This applies to ALARMS, SPEECH DIALLER and SMS
communication.
3.4. Customer ID for alarm communication to an emergency call service centre
Installer Menu Reporting
•
"P" (partition) has now been added (previously "Account No 1" etc.).
•
An ID must be entered for the corresponding partition so that alarm messages for various events in this
partition are transmitted correctly.
Send unset Tampers
Alarms Account Numbers
A1 -
Disabled
Enabled
Account No P 1
Account No P 2
Account No P 3
Account No P 4
V