Abus Secvest 2WAY Installation Instructions Manual page 109

4.4. Zone name prompts
This function is activated as follows and zone names are recorded:
User Menu Facilities On/Off
The following additional prompt is then announced:
•
With opened zone
When several zones are open, the zone with the smallest zone number is also announced.
•
In the event of an alarm
Speech dialler: The first triggered zone is also announced after "Home Message" and "Message x".
o
Alarm centre: The first triggered zone is announced for each partition, starting with the partition
o
with the smallest number.
Zone Name Prompts
"The System cannot set" + "<Zone name prompts>"
For example: An alarm is triggered in the following zones in the sequence
described below:
Zone 26 Partition 3
Zone 25 Partition 1
Zone 3 Partition 1
The following can be heard on the system:
"The partition is unset! Attention! There has been an alarm!
<announcement zone 25>, <announcement zone 26>.
A reset is required."
Enabled
IX
A1 -
Yes