Editing Detectors (Zones); Assigning The Zone Name - Abus Secvest 2WAY Installation Instructions Manual

13.6 Editing detectors (zones)

In the installer menu:
menu item.
Select the Edit Zones
The detector transmits its standard settings automatically to the alarm centre after
training. This setting can be changed at any time.
Editing Zone 01

13.7 Assigning the zone name

It is sensible to assign a clear and unique zone name so that detector can be identified
quickly in the event of a malfunction.
Example: MS for motion sensor and Office01 as location
Detector name: MS-Office01
Enter letters and characters via the keypad.
Letter-to-key assignment:
The letters and characters can be selected by pressing the keys several times. The
cursor goes to the next position after around two seconds.
Select the Name menu item.
Delete the existing name (Zone 01) and assign a unique name for the zone (max. 12
characters).
Confirm the new name by pressing OK
47
.