Editing Outputs; Assigning The Output Name; Selecting The Output Type - Abus Secvest 2WAY Installation Instructions Manual

14.2 Editing outputs

In the installer menu:
menu item.
Select the Edit Output
Now edit Zone 01.
Select the Name menu item.

14.3 Assigning the output name

It is sensible to assign a clear and unique output name so that the output can be
identified quickly in the event of a malfunction.
Delete the existing name (Output01) and assign a unique name for the output (max.
12 characters).
Enter letters and characters via the keypad.
Letter-to-key assignment:
The letters and characters can be selected by pressing the keys several times. The
cursor goes to the next position after around two seconds.
Confirm the changes by pressing OK

14.4 Selecting the output type

The output properties can be changed here.
This menu can also be used to automatically activate and deactivate the
alarm centre at a defined time. See the following page for more
information ("Manual" output type).
Select Type to configure the output.
An overview of output types can be found in the following table.
52
.