Primary Telecoms; Phone Book (Social Care); Account Numbers; Report Type - Abus Secvest 2WAY Installation Instructions Manual

20.21 Primary Telecoms

Select which primary transmission path should be used. This transmission path is used
as long as transmission is possible using it.

20.22 Phone Book (Social Care)

Select which number should be changed.
Enter the callback number of the command centre that you received for transmitting
the respective report. Press the star key to enter a dial pause. Each dial pause
interrupts the dial procedure for 3 seconds.

20.23 Account Numbers

Select which account number should be changed.
Enter the account number that you have received for transmitting from the command
centre.
Save all account numbers that should be transmitted by the wireless alarm centre
during a social care report.
An account number can be eight characters long when reporting social care
messages.
When the Scancom or Scanfast report types are used (see below), then the wireless
alarm centre uses the last four to six characters of the account number. When four
characters are entered, then the wireless alarm centre only uses these four characters.
When five characters are entered, the wireless centre adds a zero to the front of the
number (number now has six digits).
When the Tunstall report type is used, the wireless centre adds zeroes to the front of
the number to increase shorter account numbers to eight characters.

20.24 Report Type

Select a report. For a list of report types and their attributes, see the table below.
After transmitting the alarm according to the selected digital report type, the wireless
alarm centre opens an audio channel. Depending on the report type selected, various
functions are now available.
Function SCANCOM
Talk DTMF tone "2"
Listen DTMF tone "1"
Toggle DTMF tone "*"
Confirm call DTMF tone "5"
Playback basic DTMF tone "3"
message
84
SCANFAST TUNSTALL
Not available DTMF "C"
Not available DTMF "*"
Not available Not available
Not available DTMF "#"
Not available Not available