Abus Secvest 2WAY Installation Instructions Manual page 21

The call sequence starts with number 01, then number 02 up to the "Follow me"
number.
In the speech dialler menu:
1 menu item.
Select the Telephone Number 0
A dial pause of three seconds can be entered using the "
Please note that the last telephone number is designated as the Follow me number.
The wireless centre shows this number in the user menu. A user can change this
number in the system user menu. This allows the user to forward all voice messages
programmed for this field.
In the phone book (speech dialler) menu:
Enter the first phone number and name and confirm each by pressing
Allocate a trigger to a message.
Up to five triggers can be allocated to a message.
In the speech dialler menu:
menu item.
Select the Trigger 1
*
" key.
Trigger list
OK.
Enter the destination in case of a trigger.
21
Trigger Triggered by
None Triggers do not trigger messages
Fire Smoke detector
Panic Panic transmitter
Medical Emergency call transmitter, pendants
Opening, motion, glass breakage and vibration
Burglary
detector
Soak Test Fail Detector in test or monitoring mode
Technical Water detector
Social Care Pendants
Room monitoring alarm when no movement is
Social Inactive
detected
Mains Error Power outage
Tamper Tamper
In the speech dialler menu:
Select the Destination for Message 1
This message is announced four times.
.