Abus Secvest 2WAY Installation Instructions Manual page 114

3.3. Outputs - additional "Jamming" output type
Installer Menu Outputs
•
The corresponding output switches when jamming is detected.
3.4. Communication , SPEECH DIALLER, additional "Jamming" event type
Installer Menu Reporting
•
If "Jamming" is selected, the corresponding message is transmitted from the voice dialler when jamming is
detected.
4. Software changes
4.1. Reporting with ALARMS
•
The user of a key switch is transmitted with user ID 53.
4.2. Alarm signalling with "Technical Alarm" zone type
•
The wireless info module and wireless internal siren signal technical alarms using beep tones (in the same
way as the alarm centres).
4.3. New wireless accessory module
•
All new functions on the new wireless accessory module (2WAY sticker) can be used from this software
version onwards.
Edit Outputs Type
Speech Dialler Report Triggers
A2 -
Jamming
Message x
IV
Trigger x Jamming