Abus Secvest 2WAY Installation Instructions Manual page 65

15.4.3.2. Using the remote control
Now program the double-arrow key
Access the user menu as an administrator.
MENU
System setting
Select Close
Under System setting, select the Telecommands (remote control)
menu point
TELECOMMANDS
Edit
Delete
Delete All
Select Back
Select the Edit menu point and press any key on the remote control,
or alternatively select No Telecommands...
EDIT TELECOMMAND
TC01:User01
TC02:User02
TC03:User03
Select
When No Telecommands... is selected, you can select a user to receive
the new function here.
on the remote control.
SYSTEM SETTINGS
Date & Time
Edit Outputs
Telecommands
Call Downloader
Select Back
EDIT TELECOMMAND
Please press the
relevant key on the
telecommand
No Telecommands... Back
Back
TC01,T4:User01
Internal activation
Output number
Select Back
Now select the (HW)Output...
(HW)Output 01
On
Off
Toggle
Impulse
Select
Select the Impulse function for output 01.
Go back to the system settings menu and press the double-arrow key
on the remote control to check the settings.
Output 01 now switches for approx. 4 seconds.
65
Output number
(HW)Output...
Select Back
Back