Configure A User - Abus Secvest 2WAY Installation Instructions Manual

A message is displayed with the siren confirmation and the signal strength value.
Leave this display by pressing Back.
If a siren has been trained, then the
siren number.
Leave this display by pressing Back.
Select "Edit Ext Siren".
symbol is shown next to the
23
Select the trained Ext Siren.
If the external siren should be activated when the relevant partition triggers a local or
external alarm, then the partition must be set to Yes.

3.10 Configure a user

Up to 50 users can be configured.
User 01 is always the administrator and cannot be deleted.
Leave the installer menu:
.
Confirm by pressing Yes
When exiting the installer menu, the following announcement is played:
"You have exited the installer menu"
Secvest
Select Menu and enter the administrator code.
Access the user menu by entering the administrator code
You are now in the user menu (administrator).
1234
(default).