Abus Secvest 2WAY Installation Instructions Manual page 41

11. Graphic display
The graphic display informs you about all events concerning the wireless
alarm system. The following is an overview of the different display messages
and their meaning:
This symbol appears if a voice message
exists that should be listened to. An
acoustic message is issued every time
the wireless alarm system is deactiva-
ted. This is: "You have a message"
This symbol appears when activity
monitoring is activated. Remember to define
the monitoring time period. Activity
monitoring only works when the wireless
alarm system is deactivated.
Menu
Press the button under the menu
display. The wireless alarm system
then prompts you to enter your access
code (user code). If the code is
accepted, the user menu is accessed.
All user functions that were released by
the user can be made here. Note that
some functions in the user menu
require a user code with administrator
rights (master code).
.
01/05/2008
Displays the current time and date.
21:00
41
The four black bars stand for the
four individual partitions of the
wireless alarm system. A letter
in the black bar represents the
state of the partition (1–4). The
letters and their meaning:
U:
Deactivated
A:
Activated
I:
Internally activated
Note: A letter is only displayed
in the partition (bar) when at
least one detector is present in
this partition.
This symbol indicates an error in
the wireless alarm system that
must be resolved immediately.
For a summary of the different
error displays and their
meaning, see the table at the
end of these instructions. To
display the error, press the
button under the display.
You are then prompted to enter
a valid user code.