Table of Contents
Advertisement
•
Flow Control — The current Flow Control setting. Flow control may be enabled, disabled, or
be in auto negotiation mode. Flow control operates when the ports are in full duplex mode.
•
PVE — Indicates that this LAG's ports are protected by an uplink, so that the forwarding
decisions are overwritten by those of the ports that protect them.
LAG Configuration Settings
The LAG Configuration Settings contains the following fields:
•
LAG — Displays the LAG ID number.
•
Description — Displays the user-defined port name.
•
LAG Type — The port types that comprise the LAG.
•
Admin Status — Enables or disables traffic forwarding through the selected LAG.
•
Current LAG Status — Indicates if the LAG is currently operating.
•
Reactivate Suspended LAG — Reactivates a port if the LAG has been disabled through the
locked port security option.
•
Operational Status — Defines whether the LAG is currently operational or non-operational.
•
Admin Auto Negotiation — Enables or disables Auto Negotiation on the LAG. Auto-
negotiation is a protocol between two link partners that enables a LAG to advertise its
Chapter 6: Configuring Device Interfaces
Defining LAG Settings
SFE1000P Gigabit Ethernet Switch Administration Guide
LAG Configuration Settings
Chapter
6
79
Hide quick links:
Advertisement
Table of Contents
