Defining Class Mapping
The Class Mapping Page contains parameters for defining class maps. One IP ACL and/or one
MAC ACL comprise a class map. Class maps are configured to match packet criteria, and are
matched to packets on a first-fit basis. For example, Class Map A is assigned to packets based only
on an IP-based ACL or a MAC-based ACL. Class Map B is assigned to packets based on both an IP-
based and a MAC-based ACL.
The Class Mapping Page contains the following fields:
•
Class Map Name — Selects an existing Class Map by name.
•
ACL1 — Contains a list of the user-defined ACLs.
•
Match — Criteria used to match IP addresses and /or MAC addresses with an ACL's
address. The possible field values are:
–
And — Both the MAC-based and the IP-based ACL must match a packet.
–
Or — Either the MAC-based or the IP-based ACL must match a packet.
•
ACL2 — Contains a list of the user-defined ACLs.
Chapter 13: Configuring Quality of Service
Defining Advanced Mode
SFE1000P Gigabit Ethernet Switch Administration Guide
Class Mapping Page
Chapter
13
166