Cisco Linksys SFE1000P Reference Manual page 201

– Local Settings — The system time is set on the local device. This is the default value.
• Date — Indicates the system date. The field format is Day:Month:Year, for example, 04 May
2050.
• Local Time — Indicates the system time. The field format is HH:MM:SS, for example,
21:15:03.
•
Time Zone Offset — Indicates the difference between Greenwich Mean Time (GMT) and local time.
example, the Time Zone Offset for Paris is GMT +1, while the local time in New York is
For
GMT –5. There are two types of daylight settings, either by a specific date in a particular
year or a recurring setting irrespective of the year. For a specific setting in a particular year
complete the Daylight Savings area, and for a recurring setting,
• Daylight Savings — Enables the Daylight Savings Time (DST) on the device based on the
devices location. The possible field values are:
–
USA — The device switches to DST at 2 a.m. on the first Sunday of April, and reverts to standard
2 a.m. on the last Sunday of October.
time at
–
European — The device switches to DST at 1:00 am on the last Sunday in March and reverts to
time at 1:00 am on the last Sunday in October. The European option applies to
standard
EU members, and other European countries using the EU standard.
–
Other — The DST definitions are user-defined based on the device locality. If Other is selected, the
and To fields must be defined.
From
•
Time Set Offset (1-1440) — Indicates the difference in minutes between DST and the local standard
. The default time is 60 minutes.
time
The following fields are active
• From —
Indicates the time that DST ends in countries other than USA or Europe in the
Day:Month:Year format in one field and time in another. For example, DST begins on the
25th October 2007 5:00 am, the two fields will be 25Oct07 and 5:00. The possible field
values are:
– Date — The date at which DST begins. The possible field range is 1-31.
– Month — The month of the year in which DST begins. The possible field range is Jan-
Dec.
– Year — The year in which the configured DST begins.
– Time — The time at which DST begins. The field format is Hour:Minute, for example,
05:30.
•
To — Indicates the time that DST ends in countries other than USA or Europe in the Day:Month:Year
one field and time in another. For example, DST ends on the 23rd March 2008
format in
12:00 am, the two fields will be 23Mar08 and 12:00. The possible field values are:
– Date — The date at which DST ends. The possible field range is 1-31.
Chapter 16: Configuring System Time
SFE1000P Gigabit Ethernet Switch Administration Guide
for non-USA and European countries.
Chapter
complete the Recurring area.
193
16