Table of Contents
Advertisement
–
Up — Port is connected.
–
Down — Port is disconnected.
•
Port Speed — Displays the current port speed.
•
Duplex Mode — Displays the port duplex mode. This field is configurable only when auto
negotiation is disabled, and the port speed is set to 10M or 100M. This field cannot be
configured on LAGs. The possible field values are:
–
Full — Indicates that the interface supports transmission between the device and the
client in both directions simultaneously.
–
Half — Indicates that the interface supports transmission between the device and the
client in only one direction at a time.
•
PVE — Indicates that this port is protected by an uplink, so that the forwarding decisions are
overwritten by those of the port that protects it.
•
LAG — Defines if the port is part of a Link Aggregation (LAG).
Chapter 6: Configuring Device Interfaces
Defining Port Settings
SFE1000P Gigabit Ethernet Switch Administration Guide
Chapter
6
71
Hide quick links:
Advertisement
Table of Contents
