Modifying QoS Aggregate Policer
The Edit QoS Aggregate Policer Page contains the following fields.
•
Aggregate Policer Name— Specifies the Aggregate Policer Name
•
Ingress Committed Information Rate (CIR) — Defines the CIR in bits per second.
•
Ingress Committed Burst Size (CbS) — Defines the CbS in bytes per second.
•
Exceed Action — Action assigned to incoming packets exceeding the CIR. Possible values
are:
–
Drop — Drops packets exceeding the defined CIR value.
–
Remark DSCP —Remarks packet's DSCP values exceeding the defined CIR value.
–
None —Forwards packets exceeding the defined CIR value.
Chapter 13: Configuring Quality of Service
Defining Advanced Mode
SFE1000P Gigabit Ethernet Switch Administration Guide
Edit QoS Aggregate Policer Page
Chapter
13
170