•
Notification Version — Determines the trap type. The possible field values are:
–
SNMP V1 — Indicates SNMP Version 1 traps are sent.
–
SNMP V2 — Indicates SNMP Version 2 traps are sent.
•
UDP Port — Displays the UDP port used to send notifications. The default is 162.
•
Filter Name — Indicates if the SNMP filter for which the SNMP Notification filter is defined.
•
Timeout — Indicates the amount of time (seconds) the device waits before re-sending
informs. The default is 15 seconds.
•
Retries — Indicates the amount of times the device re-sends an inform request. The default is
3 seconds.
The SNMPv3 Notification Recipient table area contains the following fields:
•
Recipients IP — Indicates the IP address to whom the traps are sent.
•
Notification Type — Defines the notification sent. The possible field values are:
–
Trap — Indicates traps are sent.
–
Inform — Indicates informs are sent.
•
User Name — Displays the SNMP Communities.
•
Security Level — Defines the means by which the packet is authenticated. The possible field
values are:
–
No Authentication — Indicates the packet is neither authenticated nor encrypted.
–
Authentication — Indicates the packet is authenticated.
–
Privacy — Indicates the packet is both authenticated and encrypted.
•
UDP Port — Displays the UDP port used to send notifications. The default is 162.
•
Filter Name — Indicates if the SNMP filter for which the SNMP Notification filter is defined.
•
Timeout — Indicates the amount of time (seconds) the device waits before re-sending
informs. The default is 15 seconds.
•
Retries — Indicates the amount of times the device re-sends an inform request. The default is
3 seconds.
Chapter 12: Configuring SNMP
Defining Trap Management
SFE1000P Gigabit Ethernet Switch Administration Guide
Chapter
12
149