Chapter 6: Configuring Device Interfaces; Defining Port Settings - Cisco Linksys SFE1000P Reference Manual

Configuring Device Interfaces
This section contains information for configuring ports and contains the following topic:
•

Defining Port Settings

• Defining LAG Management
• Defining LAG Settings
• Configuring LACP
Defining Port Settings
The Port Settings Page contains fields for defining port parameters.
The Port Settings Page contains the following fields:
• Copy from Entry Number — Copies the port settings from the specified port.
• to Entry Number(s) — Assigns the copied port information to a specified port.
• Interface — Displays the port number.
• Port Type — Displays the port type. The possible field values are:
– 100M-Copper/1000M-Copper/ComboF/ComboC
port connection.
– Fiber — Indicates the port has a fiber optic port connection.
• Port Status — Displays the port connection status. The possible field values are:

Chapter 6: Configuring Device Interfaces

Defining Port Settings
SFE1000P Gigabit Ethernet Switch Administration Guide
Port Settings Page
—
Indicates the port has a copper
Chapter
6
70