PoE Settings
The PoE Settings Page contains system PoE information for enabling PoE on the device, monitoring
the current power usage, and enabling PoE traps.
The PoE Settings Page displays the currently configured PoE ports and contains the following
information:
•
Port — Displays the selected port's number.
•
Admin Status — Indicates whether PoE is enabled or disabled on the port. The possible
values are:
–
Enable — Enables PoE on the port. This is the default setting.
–
Disable — Disables PoE on the port.
•
Priority — Indicates the PoE ports' priority. The possible values are Critical, High and Low.
The default is Low.
•
Power Allocation (watts) — Indicates the power allocated to the port. The range is 3 - 15.4
watts.
•
Power Consumption (milliwatts) — Indicates the amount of power assigned to the powered
device connected to the selected interface. Devices are classified by the powered device,
and the classification information used. The field values are represented in Watts. The
possible field values are:
–
0.44 – 12.95 — Indicates that the port is assigned a power consumption level of .44 to
12.95 watts.
Chapter 4: Managing Power-over-Ethernet Devices
PoE Settings
SFE1000P Gigabit Ethernet Switch Reference Guide
PoE Settings Page
Chapter
4
13